Fail asli(Fail SVG, ukuran dasar 600 × 400 piksel, saiz fail: 73 KB)

Fail ini dari Wikimedia Commons dan mungkin digunakan oleh projek lain. Penerangan pada laman penerangan failnya di sana ditunjukkan di bawah.

Ringkasan

Keterangan
English: Overpressure ranges from 1 to 50 psi (6.9 to 345 kPa) of a 1 kiloton air burst as a function of burst height. The thin grey curve indicates the approximate optimum burst height for a given ground range.
Deutsch: Abhängigkeit des Druckpegels einer 1-Kilotonnen-Explosion von Entfernung und Detonationshöhe. Die dünne graue Kurve gibt näherungsweise die optimale Detonationshöhe an.
Tarikh Created: 21 November 2008
Sumber Karya sendiri
Pengarang SiriusB
Versi lain Image:Blastcurves_1.png

Additional Info

Plotted with Gnuplot 4.2.2. Isobars are based on numerically solved formulae from the internal help pages of the BLAST software, the H_opt curve is an analytical fit using the inversely plotted formula

This function should fit both BLAST output and Figures 3.73a-c taken from Glasstone, Dolan, The Effects of Nuclear Weapons, 1977 (EoNW77) as a compromise. Both sources differ slightly. EoNW77 shows the maximum low-pressure ranges at somewhat lower altitudes whereas for high pressures >40 psi BLAST shows no optimum altitudes at all (see the innermost isobar). However, since numerical fitting of curves taken from a paper would be a Sisyphean task while BLAST already outputs plottable numbers, only isobars from the latter are plotted here.

A note on the new version on June 6 2022: The interpolation between the Mach zone and the regular reflection zone has been altered in order to steepen the "knees". This provides a better fit to the Figures 3.73a-c in EoNW77 where the relation of GR to H is actually not unique but features local minima at the onsets of the "knees" for intermediate overpressures. In addition, contours for 1.5, 7 and 15 psi have been added.

Why psi?

Most sources, e.g. Glasstone & Dolan (1977) or Carey Sublette's Nuclear Weapon Archive use pounds per square inch as pressure units. As a rule of the thumb, e.g. most non-reinforced buildings are destroyed for overpressures above 5 psi. However, the pressures can easily be converted into SI units, e.g. kilopascals, where 1 psi = 6.8947573 kPa or, roughly, one psi equals seven kPa.

Additional notes

A note on Gnuplot SVG terminal: Set size variable as "fixed" (the default in Gnuplot), not "dynamic", to ensure correct aspect ratio. This was the reason for uploading a 2nd version.

Perlesenan

Public domain Saya selaku pemegang hak cipta karya ini melepaskan karya ini ke dalam domain awam di seluruh dunia.
Di sesetengah negara, undang-undangnya mungkin tidak mengizinkan; jika begitu:
Saya memberi sesiapa sahaja hak untuk menggunakan karya ini untuk apa jua tujuan, tanpa sebarang syarat, melainkan undang-undang menetapkan syarat-syarat sedemikian.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

menggambarkan

MIME type Inggeris

image/svg+xml

c990bdbb3756526ed486f1faa92f0bc3173d01d0

75,205 bait

400 piksel

600 piksel

Sejarah fail

Klik pada tarikh/waktu untuk melihat rupa fail tersebut pada waktu itu.

Tarikh/WaktuGambar kenitUkuranPenggunaKomen
semasa13:46, 6 Jun 2022Gambar kenit bagi versi pada 13:46, 6 Jun 2022600 × 400 (73 KB)SiriusBModification of the Mach-to-Regular reflection zone interpolation.This steepens the
10:46, 21 November 2008Gambar kenit bagi versi pada 10:46, 21 November 2008600 × 400 (75 KB)SiriusB{{Information |Description= |Source= |Date= |Author= |Permission= |other_versions= }}
10:40, 21 November 2008Gambar kenit bagi versi pada 10:40, 21 November 2008512 × 341 (75 KB)SiriusB{{Information |Description={{en|1=Overpressure ranges from 1 to 50 psi (6.9 to 345 kPa) of a 1 kiloton air burst as a function of burst height. The thin grey curve indicates the approximate optimum burst height for a given ground range.}} {{de|1=Abhängig

Laman berikut menggunakan fail ini:

Penggunaan fail sejagat

Fail ini digunakan oleh wiki-wiki lain yang berikut:

Metadata